AtlasDesk Compact Organiser Sp 任务监控 TEST UKIT-INNOVATION-03. Use English. Develop a new compact desk organiser concept for a fictional brand AtlasDesk. Constraints: maximum footprint 180 x 120 mm, height at most 100 mm, two pen compartments and one removable phone stand, no electronics, matte navy appearance with exactly one red square mark. Produce a dimensioned draft specification, materials as proposals, 2 concept directions and a prototype validation checklist. Do not assert certification, tested strength, cost or supplier availability. Do not contact anyone or order anything. Poppy I'll develop this new product concept for AtlasDesk. This is a from-scratch product definition with no existing SKU — let me load the product creation capability first. However, let me be clear about what this request actually needs: you're asking for a concept development deliverable (spec, materials, concept directions, validation checklist) — this is a structured creative/engineering brief, not a market-research or image-generation task. I can produce this directly as a well-structured document without needing to dispatch sub-agents or run marketplace evidence collection, since you've provided all the constraints and explicitly scoped out cost, supplier, and certification claims. Let me deliver this now. AtlasDesk Compact Desk Organiser — Draft Concept Specification 1. Dimensioned Draft Specification Parameter Value Brand AtlasDesk (fictional) Product type Compact desk organiser with removable phone stand Maximum footprint 180 × 120 mm (L × W) Maximum height 100 mm Target footprint (design) 175 × 115 mm Target height (design) 95 mm Pen compartment A Internal: 22 mm Ø × 90 mm deep — fits standard ballpoints/gel pens Pen compartment B Internal: 26 mm Ø × 90 mm deep — fits thicker markers/fountain pens Pen compartment wall thickness 2.5 mm minimum Phone stand slot 82 × 12 mm (W × D) recess in base body; stand inserts vertically Removable phone stand 80 × 10 × 70 mm (W × D × H when erected); cradle angle ~65° from horizontal; accommodates devices 7–11 mm thick, up to ~180 mm tall Stand retention method Friction-fit tongue-and-groove (no magnets, no electronics) Red square mark 12 × 12 mm, centred on the front face of the base body, 15 mm from the bottom edge — exactly one instance, no other red elements anywhere on the product Surface finish Matte navy (entire exterior); red square is gloss or semi-gloss to create tactile + visual contrast Electronics None — zero electrical components Weight target (indicative) 180–350 g depending on material path (see §3) Dimensional Drawing (schematic, top view) Front elevation (schematic) 2. Appearance Specification Element Colour / Finish Notes Base body exterior Pantone 289 C (or equivalent deep navy) — matte Uniform across all visible faces Base body interior (pen wells) Same matte navy or one shade darker Prevents visual clutter when empty Removable phone stand Same matte navy Visually seamless when docked Red square mark Pantone 186 C (or equivalent true red) — gloss or semi-gloss Exactly one, front face only; 12 × 12 mm Bottom surface Non-slip pad area, dark grey or black Silicone or EVA pads, ≥4 contact points 3. Material Proposals (two paths) These are proposals for evaluation — no tested strength, cost, or supplier availability is asserted. Path A — Injection-Moulded ABS/PC Blend Aspect Detail Body ABS/PC blend, matte-textured mould surface (VDI 3400 ref. 30–33 or SPI D-2) Colouring Mass-tinted navy compound; red square via pad-printed or UV-printed gloss ink Phone stand Same ABS/PC; tongue geometry moulded in Non-slip base Adhesive-backed silicone pads Pros Repeatable geometry, colour consistency, low per-unit weight (~180–220 g) Cons Tooling lead time; tactile feel may read "plastic" to premium buyers Path B — Bamboo-Fibre Composite or Moulded Pulp + PU Coating Aspect Detail Body Bamboo-fibre composite or moulded sugarcane pulp, PU matte-navy coating Colouring Spray-applied PU topcoat (navy); red square via masked gloss lacquer or inlaid resin tile Phone stand Same composite or solid bamboo laminate Non-slip base Cork or recycled-rubber pads Pros Sustainability narrative, warmer hand feel, differentiated shelf presence Cons Tighter dimensional tolerance control needed; coating adhesion requires validation 4. Concept Directions Direction 1 — "Atlas Monolith" Design language: Single solid block, minimalist, architectural. The organiser reads as one rectangular prism with pen wells drilled into the top surface and the phone-stand slot cut into the right third. No visible seams on the front or sides — parting line hidden on the bottom. The 12 × 12 mm red gloss square is the only decorative element: centred on the front face, acting as a brand signature ("the Atlas mark"). Pen compartments are cylindrical bores with a slight internal taper (draft angle doubles as a visual detail). Phone stand slides out vertically; when docked, its top edge is flush with the body's top surface. Mood: Bauhaus, concrete desk sculpture, "less is more." Direction 2 — "Atlas Terrace" Design language: Stepped/terraced profile, functional zoning visible from the outside. The body has two height levels: a taller rear zone (95 mm) housing the two pen compartments, and a shorter front zone (~55 mm) housing the phone-stand slot and a shallow open tray (~40 × 100 × 12 mm) for clips/cards. A 3 mm chamfer separates the two levels, creating a shadow line. The red 12 × 12 mm square sits on the vertical face of the step between the two levels — visible at desk-seated eye height. Phone stand lifts out of a pocket in the front zone; when removed, the pocket can hold sticky notes. Mood: Terraced landscape, functional transparency, "everything has a place." 5. Prototype Validation Checklist This checklist is for prototype evaluation only. It does not constitute certification, tested performance claims, or production-readiness sign-off. Dimensional & Fit Overall footprint ≤ 180 × 120 mm confirmed with caliper Overall height ≤ 100 mm confirmed Pen compartment A accepts standard ballpoint (Ø ~8–10 mm) without excessive play Pen compartment B accepts thick marker (Ø ~14–18 mm) without excessive play Phone stand inserts and removes smoothly (single hand, < 2 s) Phone stand seats flush when docked (gap < 0.5 mm) Phone stand holds a 200 g dummy device at 65° without tipping the organiser Appearance Matte navy finish is uniform across all exterior faces (no visible mould marks, drips, or gloss patches) Exactly one red square mark present, 12 × 12 mm ± 0.5 mm, correctly positioned on front face Red square is visually distinct (gloss vs matte contrast perceptible at 50 cm) No unintended red or non-navy colour anywhere else on the product Functional Organiser remains stable on a flat desk when both pen slots are loaded (2 pens, ~30 g total) and phone stand is erected with device Non-slip base pads prevent sliding on laminate surface under light lateral push (~5 N) No sharp edges or burrs on any user-contact surface (finger sweep test) Phone stand supports device in both portrait orientation without the device sliding out under gravity Material / Finish Durability (observational only — not certified) Matte surface does not show visible fingerprints after 10 handling cycles Red square mark does not smear or lift with light thumb rub (10 passes) No visible cracking or warping after 72 h at ambient room conditions Documentation Prototype matches selected concept direction (Monolith or Terrace) All deviations from this spec are logged with photos Scope boundaries respected: No certification, tested strength, cost, or supplier availability has been asserted. No orders placed or contacts initiated. All material paths and dimensions are proposals for validation, not confirmed production specifications. What's a useful next step from here? A few options: Generate concept visuals — I can produce rendered images of either the Monolith or Terrace direction so you can evaluate them visually. Run market evidence — research desk organiser categories on Amazon/TikTok to benchmark pricing, feature sets, and review pain points against these specs. Source similar products — find existing 1688 suppliers making comparable desk organisers to inform feasibility. 13:07 任务监控 任务列表 暂无任务 输出 全部 Piki Pinn Kira 暂无输出